GRANITE COMMUNICATIONS, INC.
www.granitecomm.com
phones@granitecomm.com
203-234-4900
PANASONIC DBS FLIP FLOPPING TWO EXTENSIONS
DESCRIPTION
With Auto Set Relocation, the program settings of one extension can be relocated to another extension. Auto Set Relocation is commonly used when extension users want to “trade” work areas. For example, if Extensions “A” and “B” are going to switch office locations, auto set relocation enables them to also switch telephone settings without reprogramming.
OPERATION
Before a phone can be relocated, it must be assigned an auto set relocation code. See “Programming Requirements” for the associated program address. The following example illustrates how the program settings for extensions 200 and 300 could be switched.
TO TRANSFER EXTENSION SETTINGS FROM 200 TO 300
- 1. At extension 200, press ON/OFF or ICM key
- 2. Press # (the pound key) and then10
- 3. Dial extension number 300.
- 4. Enter the four-digit auto set relocation code (5555) assigned to extension 300 (if 5555 does not work, try 1212).
- 5. Press ON/OFF
* All programmed station features, TRS, and LCR settings from 200 will
be transferred to 300.
- 6. Extension 300 will be placed out of service.
*Go to other phone (ext 300) and reset it (unplug from wall or from under phone and plug back in)
Do you know all of the services Granite offers !!
Phone Systems - Voice Mail - Paging Systems – Voice & Data Cabling
Service Contracts - Call Logging Systems - Professional Music on Hold Services
Wireless Phone Systems – Audio & Video Conferencing Systems
Voice over IP Networking – Headsets
|
